Transformer on-Load Tap-Changer Tester with High Quality

• Max Diameter of Workpiece: >3200mm
• Mass Scope of Workpiece: 20kg
• Type: Universal Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Manual Control
• Weight: 20kg
• Power Source: 220V
• Oil Cylinder Position: None
• Time Resolution: 0.1ms
• Warranty: 1 Year
• Single Package Size: 49X35X40cm
• Transport Package: Wooden Box
• Specification: 225mm*165mm*125mm
• Trademark: KvTester
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500/Month

Product Description

Description

This device applies to measure and analyze loading tap switch property index of power transformer and special transformer. It is controlled by computer; using special loops to test the transition time, transiting wave, transition resistance, and three-phase synchronism of tap switch, etc.

Features

1. Test Y0 Y △type transformer, display the resistance without conversion. 

2. Data analysis of human nature, you can automatically identify the fault in the middle of the waveform, and make a mark; 

3. Waveform display is automatically adjusted according to the sampling data and the resistance to the magnitude of the time; 

4. The △ type transformer can display the three-phase synchronization; 

5. The test can be carried out with or without winding; 

6. There are four terminal connection modes, to provide high precision resistance measurement, and no need to wire compensation. 

Product Parameters

Three phase constant current source charging, charging current	3A/1A;0.6A/0.2A
Port maximum voltage	24V
Maximum range of resistance	100 Ω
Measurement range of excessive resistance	1A : 0.4Ω~20Ω
	0.2A: 10Ω~100Ω
Waveform record time length	300ms
Sampling rate	30k
Time resolution	0.1ms
Resistance resolution	0.1Ω
Accuracy	Excessive resistance:0.5% reading±0.1Ω
	Excessive time: 0.5% reading±0.2ms
Temperature	-10ºC ~40ºC
Using relative humidity	< 85%RH