Capacitance and Dissipation Factor Tester Tan Delta Tester

• Warranty: 1 Year
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: 25kg
• Type: Universal Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Model NO.: ZC-221A
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Manual Control
• Weight: 7kg
• Power Source: 220V, 50Hz
• Oil Cylinder Position: None
• Relative Humidity: 5%~95%,No Dewing
• Transport Package: Standard Box Inside and Wooden Box Outside
• Specification: 380*280*140mm3
• Trademark: KvTester
• Origin: China
• HS Code: 903180909
• Production Capacity: 500/Month

Product Description

Product Features

1.The instrument can automatically identify the fracture opening and closing state, and according to the reference state corresponding to the fracture tip and operation.

2.Independent 6 fracture, can detect and indicate the connection state of the fracture, facilitate the user to check the wiring.

3.The machine can store 100 groups of test results.

4.Large screen LCD (320 * 240) LCD display, advanced gray screen, in the sun is not black reflective, graphic and English characters menu operation, user-friendly menu interface, easy to operate.

5.instrument has powerful function of graphic analysis, and the waveform and measurement data are displayed on the same screen;

6.The utility model has the function of time delay protection, and the coil voltage can be automatically cut off after the circuit breaker is operated;

7.The instrument do electric test and manual test.

8.For high and low voltage test, automatically find the lowest score or closing voltage.

9.Reclosing test, can be divided into points, points, points and parameters, can test the parameter for open-close ,close-open ,close-open-close.


 Product Parameters

Type		ZC-221A
Function		Measurement of dielectric loss tangent and capacitance of equipment
Working power	Input voltage	180Vac~270Vac
	Allowable input voltage	85Vac~264Vac
	Frequency	50/60Hz
	Allowable frequency	45Hz~65Hz
	Input power	800VA
	Joint	Standard AC socket 60320
Internal High-voltage	Set voltage range	0.5~10kV
	Maximum output current	200mA
	Boost &Reduction voltage	Continuous smooth adjustment
	Voltage accuracy	±(1.5%×reading +10V)
	Voltage resolution	1V
External High-voltage	Positive wiring	Maximum test current  1A,Power frequency or frequency conversion 40~70Hz
	Negative wiring	Maximum test current 1A/10kV,Power frequency or frequency conversion 40~70Hz
Capacitance range	Internal High-voltage	3pF~60000pF/10kV;60pF~1μF/0.5kV
	External High-voltage	3pF~1.5μF/10kV;60pF~30μF/0.5kV
	Resolving power	Highest 0.001pF,4 significant digits
Measurement accuracy	Cx	±(reading ×1%+1pF)
	tgδ	±(reading ×1%+0.00040)
Other parameters	Anti-interference index	Frequency conversion anti-jamming, under 200% interference can still achieve the above accuracy
	Tgδ range	No limit, resolution 0.001%, capacitance, inductance, resistance, automatic identification of the three test samples
	Test current range	10μA~5A
	CVT self excitation low voltage output	output voltage 3~50V, Output current 3~30A
	Measurement time	About 40s, relating to measurement
Environment condition	Operating temperature	-10ºC~+50ºC
	Storage temperature	-25ºC~+70ºC
	Relative humidity	5%~95%,no dewing
Physical characteristics	Size	435×340×340mm^3
	Weight	≈30kg (Excluding attachments)

 

Accessory List of the equipment

No.	Device name	Number
1	Fracture signal line	two sets
2	Closing and opening control line	one set
3	10A power cord	one piece
4	10A fuses	two pieces
5	Printing paper	one roll
6	50mm linear sensor	one
7	360°rotating sensor	one
8	Dedicated connector of VS1 vacuum switch	one
9	Dedicated connector of SF6 breaker	one set
10	Gimbal	one
11	Short circuit wire	one piece
12	Ground wire	one piece